Home >
Products >
Concrete mixer truck bearings > Spherical roller bearing for cement mixer gearbox PLC59-10
Spherical roller bearing for cement mixer gearbox PLC59-10
Dimensions |
Basic load rating |
Weight |
Bearing designation |
d |
D |
B1 |
B |
Dynamic (Cr) |
Static (Cor) |
|
|
mm |
kN |
kg |
|
110 |
180 |
69 |
82 |
501 |
849 |
7.7 |
PLC 59-10 |
The following bearings are designed for use in mobile cement mixer gearboxes.The bearings are mounted onto the
main shaft of the gearbox and are offered in three basic designs: PLC 58-6, PLC 59-5, and PLC 59-10, all have a
wider outer ring, increasing the self-aligning ability of the bearing. These bearings are produced within ABEC 1
tolerance and have a C0 radial clearance.
The PLC 59-5 has a two-piece brass cage, which allows a higher operating temperature than other plastic cage
designs.The brass cage also offers complete compatibility with all synthetic lubricants.
The PLC 59-10 also has a two-piece brass cage and offers all the same design advantages as the PLC 59-5. This
bearing also has a high capacity design, which increases the dynamic and static load ratings. Both PLC 59-5 and
PLC 59-10 have a two-piece split outer ring, which allows for maximum rollers and a narrower inner ring.
The PLC 58-6 has a polyamide cage, which allows the bearing to be assembled so that the outer ring does not have
to be split into two pieces